Author Topic: Mac Does Not See Printer on USB  (Read 25 times)

Offline ricardobrooks

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Mac Does Not See Printer on USB
« on: August 08, 2018, 11:42:58 PM »
Hello,

So brand new to this 3D printing thing and been anxious to get my nice shiny new Trinus set up and running. Only to run into a few bumps in the road. Latest being my Mac does not see the printer when plugged into a USB port on my Mac. I tried Pango 2.1 and 2.3 and neither will show the printer in the list of port connections.
I then looked at my Mac system report and it appears to not see the printer either. I tried the USB cable that came with the printer and another I use regularly with my Arduino. Neither works. I tried rebooting the Mac - no joy; tried power cycling the Trinus - no joy. Nothing seems to make the Mac see my printer.

Any help will be apprecited.

I didn't find the right solution from the Internet.

References:
http://www.kodamaforums.com/phpBB3/viewtopic.php?t=2104
Talent Acquisition Example

Thank you.