Author Topic: Printer Settings Since Software Update  (Read 2417 times)

Offline jacobpemble

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Printer Settings Since Software Update
« on: November 14, 2013, 12:57:23 AM »
I updated the UP Mini software just over a month ago and can no longer print shell items without any internal support structure. This is becoming an issue as I am tying to prototype a series of vases for a client. I'm also unable to print with an open top despite that being what the file is.

I've attached an image of the settings as they currently are and am desperate for some advice.

I'm using the software via a MAC

Previous to the update it was running like a  dream



Offline dale3dps

  • Administrator
  • Jr. Member
  • *****
  • Posts: 68
  • Karma: +0/-0
    • 3D Printing Systems
Re: Printer Settings Since Software Update
« Reply #1 on: November 14, 2013, 08:37:57 AM »
Hi Jacobpemble,

There is a new version of the Mac software available from our website which might resolve the issue.
Otherwise the best course of action might be to go back to the older version of the software.
| Sales and Support | www.3dprintingsystems.com | Skype: dale3dps