Author Topic: How to print a large model in sections...  (Read 3241 times)

Offline dale3dps

  • Administrator
  • Jr. Member
  • *****
  • Posts: 68
  • Karma: +0/-0
    • 3D Printing Systems
How to print a large model in sections...
« on: March 18, 2013, 07:14:17 AM »
If your model is to large to print in one go and you want to slice it up for printing, check out Netfabb Studio basic.
http://www.netfabb.com/basic.php
It is able to cut the model up into sections ready for printing, with flat edges to glue together at the end. It is also able to fix some problems in the STL files.

You can download our pdf guide here http://3dprintingsystems.com/download/Cutting%20STL%20in%20Netfabb.pdf
« Last Edit: March 18, 2013, 01:05:59 PM by dale3dps »


| Sales and Support | www.3dprintingsystems.com | Skype: dale3dps

Offline joemar

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Re: How to print a large model in sections...
« Reply #1 on: January 28, 2015, 05:34:53 PM »
Thanks to the guide, will try how I can work perfectly for this one. Is that a simple guide anyway? I prefer first the simple steps and forward.