Recent Posts

Pages: 1 2 [3] 4 5 ... 10
21
Practical Explanation ( For Example ) :- `1st of all can you tell me every single seconds detail from that time when you born ?? ( i need every seconds detail ?? that what- what you have thought and done on every single second )

can you tell me every single detail of your `1 cheapest Minute Or your whole hour, day, week, month, year or your whole life ??

if you are not able to tell me about this life then what proof do you have that you didn't forget your past ? and that you will not forget this present life in the future ?

that is Fact that Supreme Lord Krishna exists but we posses no such intelligence to understand him.
there is also next life. and i already proved you that no scientist, no politician, no so-called intelligent man in this world is able to understand this Truth. cuz they are imagining. and you cannot imagine what is god, who is god, what is after life etc.
_______
for example :Your father existed before your birth. you cannot say that before your birth your father don,t exists.

So you have to ask from mother, "Who is my father?" And if she says, "This gentleman is your father," then it is all right. It is easy.
Otherwise, if you makes research, "Who is my father?" go on searching for life; you'll never find your father.

( now maybe...maybe you will say that i will search my father from D.N.A, or i will prove it by photo's, or many other thing's which i will get from my mother and prove it that who is my Real father.{ So you have to believe the authority. who is that authority ? she is your mother. you cannot claim of any photo's, D.N.A or many other things without authority ( or ur mother ).

if you will show D.N.A, photo's, and many other proofs from other women then your mother. then what is use of those proofs ??} )

same you have to follow real authority. "Whatever You have spoken, I accept it," Then there is no difficulty. And You are accepted by Devala, Narada, Vyasa, and You are speaking Yourself, and later on, all the acaryas have accepted. Then I'll follow.
I'll have to follow great personalities. The same reason mother says, this gentleman is my father. That's all. Finish business. Where is the necessity of making research? All authorities accept Krsna, the Supreme Personality of Godhead. You accept it; then your searching after God is finished.

Why should you waste your time?
_______
all that is you need is to hear from authority ( same like mother ). and i heard this truth from authority " Srila Prabhupada " he is my spiritual master.
im not talking these all things from my own.
___________

in this world no `1 can be Peace full. this is all along Fact.

cuz we all are suffering in this world 4 Problems which are Disease, Old age, Death, and Birth after Birth.

tell me are you really happy ?? you can,t be happy if you will ignore these 4 main problem. then still you will be Forced by Nature.
___________________

if you really want to be happy then follow these 6 Things which are No illicit s.ex, No g.ambling, No d.rugs ( No tea & coffee ), No meat-eating ( No onion & garlic's )

5th thing is whatever you eat `1st offer it to Supreme Lord Krishna. ( if you know it what is Guru parama-para then offer them food not direct Supreme Lord Krishna )

and 6th " Main Thing " is you have to Chant " hare krishna hare krishna krishna krishna hare hare hare rama hare rama rama rama hare hare ".
_______________________________
If your not able to follow these 4 things no illicit s.ex, no g.ambling, no d.rugs, no meat-eating then don,t worry but chanting of this holy name ( Hare Krishna Maha-Mantra ) is very-very and very important.

Chant " hare krishna hare krishna krishna krishna hare hare hare rama hare rama rama rama hare hare " and be happy.

if you still don,t believe on me then chant any other name for 5 Min's and chant this holy name for 5 Min's and you will see effect. i promise you it works And chanting at least 16 rounds ( each round of 108 beads ) of the Hare Krishna maha-mantra daily.
____________
Here is no Question of Holy Books quotes, Personal Experiences, Faith or Belief. i accept that Sometimes Faith is also Blind. Here is already Practical explanation which already proved that every`1 else in this world is nothing more then Busy Foolish and totally idiot.
_________________________
Source(s):
every `1 is already Blind in this world and if you will follow another Blind then you both will fall in hole. so try to follow that person who have Spiritual Eyes who can Guide you on Actual Right Path. ( my Authority & Guide is my Spiritual Master " Srila Prabhupada " )
_____________
if you want to see Actual Purpose of human life then see this link : ( triple w ( d . o . t ) asitis ( d . o . t ) c . o . m {Bookmark it })
read it complete. ( i promise only readers of this book that they { he/she } will get every single answer which they want to know about why im in this material world, who im, what will happen after this life, what is best thing which will make Human Life Perfect, and what is perfection of Human Life. ) purpose of human life is not to live like animal cuz every`1 at present time doing 4 thing which are sleeping, eating, s.ex & fear. purpose of human life is to become freed from Birth after birth, Old Age, Disease, and Death.
22
General Discussion / Re: Help in 3D printing
« Last post by vexpertise on April 26, 2017, 10:31:08 PM »
 I cleaned the nozzle and the little metallic wheel that pushes the filament into the extruder. After that it worked fine. The information on how to clean the nozzle is found in the manual at pp3dp.com
23
UP BOX / Machine worked fine, now nozzle runs into board no matter what settings
« Last post by Edz on April 15, 2017, 10:19:58 AM »
Have a new Upbox+ that worked fine for the first 3 print jobs, then clogged up. Ran a 1.5 mm drill through nozzle to clean it, now nozzle runs into board no matter what settings? Have done auto calibration, nozzle check, changed nozzle height from 208 to 215, still hits perf board and burns a groove in it? Any ideas?
24
UP BOX / Re: Extruder stopped extruding halfway through print
« Last post by Kaye on May 26, 2016, 08:35:34 AM »
I have had a lot of problem with air printing. I don't know if the nozzle gets blocked. I love the finished product when it works but it seems it only works 50% of the time. I have pressed extrude but nothing is coming out. I am in a school and want to get the students printing their creations. I am not an engineer and don't know how to fix it.
25
UP BOX / Re: Extruder stopped extruding halfway through print
« Last post by Blake on April 25, 2016, 12:09:16 PM »
I have the same problem, at first I thought it was the extruder was too hot, as it was grinding into the filament stopping feeding.

But I think it has to do with the 1kg rolls I am using, I did not have a problem with the 500g roll it came with.

Doing another print right now. We will see.
26
UP BOX / Extruder stopped extruding halfway through print
« Last post by brypar on April 07, 2016, 07:42:09 AM »
I woke up this morning to see that the extruder had stopped extruding. At first I thought I had run out of filament but this wasn't the case. The printer is brand new (1 day old) and successfully printed 2 earlier items. The print time was 15 hours.

Any ideas? Long shot, but can the print be started where it stopped even though it ran for over an hour printing nothing?
27
UP BOX / Vertical Axis motor slip
« Last post by abear on March 16, 2016, 01:44:55 PM »
Hi Support,

My UPBox has just developed a Vertical axis issue.
After a platform level calibration, the bed rises slowly to auto height detect. This all works fine.
I then start a print and the bed rises rapidly, but makes a grinding noise for a short period as the bed rises, the print then starts about 1 to 2 inches short of the print bed.

I haven't looked behind the panel that houses the vertical axis motor, so I don't know how it's driven, but it sounds like a belt slipping.

Any help would be greatly appreciated.

Thanks
Adrian Bear
28
UP BOX / Re: From door to empty filament
« Last post by abear on March 16, 2016, 01:38:22 PM »
Yes please :)
29
Software / Re: Can not install Mac print software on Mavericks OS 10.9.4?
« Last post by missdoig on February 16, 2016, 03:42:51 PM »
I have the same issue - did you find a fix? I have hooked up a desktop but really need it to connect to a Mac laptop...cheers
30
UP Mini / Up mini randomly stops feeding during prints
« Last post by craig on January 29, 2016, 05:22:44 PM »
Hi all,

I brought an Up Mini last year and gradually learning all the little tricks involved in getting a somewhat successful print. Clearly a lot more than uploading, press print and there you go!

I hadn't been using my printer for a while, so when it came to doing so the other day I made sure I did a few extrusions, swapped out the extruder (I have a spare) and cleaned the drive gear on the head stepper.

Annoyingly, and it seems for no apparent reason, at varying times throughout each print I try, the head will stop feeding plastic and continue to "print air." Obviously, there is no way to know or stop the print once this occurs, so I've ended up with lots of half prints.....

It is not intermittent, when it stops, it stops for good. Once I reset the power and re-initialize it it goes back to feeding happily again.

I stress again, the machine continues to operate, but once stopped does not feed any more filament......

The stepper appears to be working fine (withdraws and extrudes normally) and the filament is not stuck on the spool (I have rewound it just to make sure).

Has anyone else come across this? I've got some new filament and a new extruder stepper coming, but I'm not convinced this will fix the problem.

Any thoughts? I'm getting desperate.......

Cheers,

Craig
Pages: 1 2 [3] 4 5 ... 10