Author Topic: Inspire S250  (Read 2600 times)

Offline Domenic

  • Newbie
  • *
  • Posts: 8
  • Karma: +0/-0
Inspire S250
« on: July 05, 2013, 02:45:59 PM »
Hi all,

We have been using an Inspire S250 for the past week having upgraded from a BFB RapMan 3.1. Very impressed thus far and learning our way around the intricacies of the machine.

So far we have only had one or two prints fail; this has been due to operator error rather than the machine. This is a great relief as more often than not we would return to a birds-nest spewing forth from the (C)RapMan!

Looking forward to experimenting with some different materials, particularly the soluble HIPS and High Impact ABS/Polycarbonate.

Inspire S250