Author Topic: Machine starts before bed temperature hits 100%  (Read 1605 times)

Offline Flech1971

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Machine starts before bed temperature hits 100%
« on: September 28, 2015, 03:34:03 PM »
very first print the machine waited for the bed temperature to get to 100%

now it just runs as soon as the nozzle is hot enough (means it doesnt stick to the bed)...anyone else have this problem?

i have to manually heat the bead, wait for it to get to about 90C then fire up the print....very annoying