Author Topic: UP! mini 3D printer will not turn on  (Read 1592 times)

Offline Driscoll3

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
UP! mini 3D printer will not turn on
« on: June 22, 2015, 10:40:35 PM »
I have the UP! mini 3D printer. I accidentally left the printer on over the weekend, and when I attempted to print, the printer would not connect to the laptop. Both the power cord and the usb cable were fully connected. The printer would not turn off on its own, so I unplugged it and plugged it back in. The power button lit up blue and switched back to red. No matter what I did, the printer would not switch back to blue or beep three times like it usually does when it turns on. I unplugged and plugged it multiple times after that and received similar results. Finally, the light turned blue and stayed blue, but the computer would not recognize the usb connection. The printer has not made any of its usual starting up sounds. Please help.