Author Topic: Hello, and nozzle temperature pegged at 361 C  (Read 1595 times)

Offline Thread

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Hello, and nozzle temperature pegged at 361 C
« on: January 27, 2015, 12:41:20 PM »
Hello,

I was changing spools using "withdraw" someone asked a question and in explaining I missed the cycle. I re-initiated the cycle and all seemingly went well. I did hear some clicks, for the first time though.

Later when I started a print cycle I got an "extruder too hot" error and a continuous beep tone. And the nozzle "temperature" stays at 361 c, though it's cool to the touch.

Also it will neither extrude or withdraw. I have also tried jiggling wires coming from the hot side of the extruder head.

Any thoughts and or other help would be greatly appreciated.

Thanx.